| If
you do not use all the paper in a ream of Xerox carbonless
paper immediately after opening, close and seal the original
ream wrapper to store. Do not leave in paper trays overnight.
We recommend that you image and use Xerox
carbonless paper as a form within one year of receiving your
order. For best results, use within four months of receiving.
To ensure that Xerox carbonless paper is properly
programmed and loaded when you are getting ready to run a
job, print one complete set. Remove the set from the output
module and mark the top sheet with a pen or a pencil. If the
paper is loaded correctly, an image should appear on the subsequent
sheets within a few seconds.
If an image does not appear, check how you
have loaded the paper in the feed tray. Note: Since you are
running a job involving sequential sheets comprising a set,
do not select "Proof" or "Sample" copy
during the job. It will disturb the integrity of the set.
It is normal for some sheets to be left in
the tray when "tray empty" is activated, but this
can disturb the correct sheet sequence for a pre-collated
set. To avoid this problem, remove unused sheets from the
bottom of the tray, load tray with full reams, place unused
sheets on top of the last ream loaded, and restart job.
When you encounter a paper jam while running
multi-part pre-collated sets, it is important that you ensure
the integrity of the sets after the jam has been resolved.
To do this, check the last sheet in the output stack and ensure
that the pre-fed sheet in the feed tray follows the proper
form sequence.
If necessary, discard sheets from the feed
tray to ensure the integrity of the finished sets. After a
jam, the Xerox 5090/DocuTech machine family discards the first
five sheets from the stack/feed tray before recommencing printing.
When you are working on these machines, check the last sheet
in the output stack and ensure that the sixth sheet in the
feed tray maintains the proper sequence of forms.
If necessary, discard sheets to ensure the
integrity of the finished sets.
Xerox carbonless paper is duplex compatible
in a number of machines. Check How to Load for compatibility
information on your machine.
You can easily convert a two-part straight
pre-collation into a two-part reverse pre-collation by simply
putting the top sheet on the bottom of the stack.
Xerox carbonless paper has an odor that differs
from regular paper. This is normal and is not harmful in any
way.
When you are running pre-collated Xerox carbonless
paper from friction feed trays, you can expect a slight scuff
mark on the second or subsequent sheets.
Copy
Paper - Printer Paper | Why
Buy Recycled Paper? | Recycled
Copy Paper | Give
A Gift To The Environment |
Pre-Printing:
Best Results and Precautions |
Carbonless
Paper | Paper:
Quality Tested | Choosing
the Right Paper |
The
Creation of the Copier
| Disadvantages
of a Laser Printer
| Are
You Ready for a Paperless Office? |
